0.10mm denotes the diameter or cross-sectional area of aluminum wire. It is a fine wire size for internal winding and high density wiring requirements of electrical appliances. Although aluminum has a lower conductivity compared to copper conductors, 0.10mm electrician's aluminum wire can still provide adequate conductive properties in some applications, especially in low power devices and light load circuits.

Aluminum wire has a lower density relative to copper wire, making it lighter and easier to carry and install. In addition, aluminum is a common metal that is relatively inexpensive, so 0.10mm electrician's aluminum wire is usually more affordable than copper wire of the same size.

Aluminum has a high heat capacity, meaning it is able to absorb and store more heat as current flows through it. This can help prevent wiring from overheating, but proper heat dissipation is needed to ensure stable operation of electrical equipment.

Compared to copper, aluminum is more prone to oxidation and corrosion. Therefore, 0.10mm electrician aluminum wire usually needs surface treatment or special coating to improve its corrosion resistance to extend the service life of the line.



Aluminum conductors have slightly poorer connection properties compared to copper conductors. When connecting aluminum conductors, specially designed connectors or terminals are required to ensure reliable contact and current transfer and to prevent loose or high resistance at the connection point.

Due to the low electrical conductivity of aluminum, the load capacity of 0.10mm electrical aluminum wire is relatively low. When designing and installing electrical equipment, the suitability of using aluminum conductors needs to be determined based on specific current loading requirements and electrical standards.

Aluminum is a recyclable material with a low environmental impact. Therefore, the use of 0.10mm electrical aluminum wire can help reduce the demand for limited resources and promote sustainable development.

Aluminum 0.10mm electrical wire typically complies with the International Electrotechnical Commission (IEC) or relevant industry standards and codes. This ensures that the aluminum wire is recognized for its quality and performance and is compatible with other equipment and components.

 Aluminum conductors and copper conductors differ in some respects, particularly in terms of electrical conductivity, connectivity and load capacity. When selecting and using 0.10mm electrician's aluminum wire, it is necessary to evaluate the needs and electrical requirements of the specific application and follow the relevant installation and use guidelines to ensure the safety, performance and reliability of the line.