We have many kinds of products ,such as enameled aluminum wire, enameled cooper wire, paper covered magnet wire, fiber glass covered magnet wire and other aluminum/cooper magnet wire products.

We produce the thermal class of enameled aluminum wire from 130 to 220 Centigrade.

The conductivity of electrical conductor grade aluminum wire (Alloy 1350-0) is 61.8% of the equivalent cross-sectional area of annealed ETP copper. Therefore aluminum wire must have 1.6 times the cross sectional area for a given copper wire in order to achieve a comparable DC resistance.

Gauge of enameled aluminum wire: Enameled round aluminum wire: 0.2mm-8.0mm Enameled flat aluminum wire: a: 1-6mm, b: 3-16mm

Yes, for favorable offer, There is one problem need confirm again, PEW is for Class 155 or 180, not Class 200.

Yes, We could provide the free samples within 0.5kg. You only need undertake the express charges.

“American Wire Gauge” is the standard used to represent successive diameters of wire. The system is based on the establishment of two arbitrary sizes: 0000 (4/0 or '4-aught') defined as exactly .4600” diameter and 36, defined as exactly .0050” diameter. The ratio of these two sizes is 92 and the sizes between the two are based on the 39th root of 92, or approximately 1.123, so the nominal diameter of each gauge size increases approximately by this factor between AWG 36 and AWG 4/0 and decreases by this factor between AWG 36 and AWG 56, which is the smallest practical diameter for commercial magnet wire. Nominal wire diameters to AWG 44 are rounded to the fourth decimal place and aren't necessarily rounded to the nearest digit.