Copper Clad Aluminum CCAM Winding is a wire manufacturing technique used to make conductive core wire. Copper-clad aluminum CCAM wire consists of three metals: copper, aluminum and magnesium. The core of the CCA winding is an aluminum core with a layer of copper cladding, while magnesium is used to improve the bonding properties between the aluminum core and the copper layer.


   - LIGHTWEIGHT: Copper clad aluminum CCAM windings have a lower density as compared to pure copper conductors because of the lower density of aluminum. This makes copper clad aluminum windings an attractive choice for applications where weight is critical, such as automotive electrical systems.
   - Good electrical conductivity: The electrical conductivity of copper-clad aluminum CCAM-wound wire is somewhere between that of copper conductors and pure aluminum conductors. Although it has a lower conductivity than pure copper wire, its conductivity is adequate in most low current applications.
   - Insulation: Copper clad aluminum CCAM windings are usually coated with special insulating materials to provide good insulation and electrical safety.

3. Application: Copper Clad Aluminum CCAM Winding Wires are widely used in various electrical equipment and electronic products, such as power tools, motors, transformers, coils, solenoid coils and so on. They are suitable for low-current applications, scenarios where weight is critical or economy is a priority.

4. Caution:
   - Copper-clad aluminum CCAM-wound wires have a higher resistivity compared to pure copper conductors, so current loading and wire cross-section need to be considered when designing circuits to ensure that electrical requirements are met.
   - Appropriate connectors and adapters need to be used for connection and termination to ensure that contact with other metals does not cause galvanic corrosion problems.
   - When selecting and using Copper Clad Aluminum CCAM Winding Wire, it is recommended to refer to the relevant standards and specifications and consult a professional electrical engineer or supplier to ensure that the wire selected is suitable for your specific needs and application requirements.

Please note that the information provided above is for reference only. In actual applications, it is recommended to consult a professional for detailed advice and guidance depending on the specific situation and requirements.