Speaker wire Enameled copper wire 2L Class 155

2024-03-18 14:21:53

Speaker wire Enameled copper wire 2L Class 155

Loudspeaker Wire Grade 2L 155 Enameled copper wire is most commonly used for loudspeakers, but aluminum and copper-clad aluminum wire (CCAW) are also used. Copper is more conductive than aluminum, and replacing copper with aluminum requires a larger diameter wire to achieve the same conductivity.

Copper is the most widely used material in speaker cables due to its low cost and low resistance. However, copper oxidizes, so it needs to be well covered and insulated.

Features
Solderable enameled round copper wire
Heat Resistance Class 155
30AWG 0.25mm
Utilizes polyurethane
Self-fusing enameled copper wire
Insulation Conductor: Round 99.9% pure copper rod
Self-adhesive wire Enameled wire for voice coil Speaker wire

Is it the same as copper wire?
In a nutshell, speaker and copper power cables are variations on the same concept. Investing in speaker cables isn't always worth it. No matter what you choose, you can find almost any type of cable at Nassau Country Cable.

Speaker cable vs. enameled wire
Or by taking an old (non-ringed) transformer, pulling the stack, and then using the stack to build a suitable magnetic structure around a prepared spool of wound wire, a permanent magnet alternator or a fully externally excited machine should be possible, and save a lot of coil winding.
In any case, transformer stacks have good magnetic properties for such things.

Where can I buy enameled wire?
Export enameled wire from LP Industries with a minimum MOQ of 300-500kg/gauge.
Send