Enameled Round Aluminum Wire Aluminum Magnetic Wires

Enameled Round Aluminum Wire Aluminum Magnetic Wires
Custom: Support Custom
Availability: Available
Brand: LP

Enameled Round Aluminum Wire Aluminum Magnetic Wires Enameled Aluminium Winding Wire

Insulation Thickness: G1, G2, G3;
Temperature Class (℃): 120(Class E);180 (Class H);200 (Class C);220 (Class C+);
Size: Diameter: 0.06~10.0 mm;
Standards: IEC,NEMA,GB,JIS;

Products Description

Product Name	29-39 Gauge EI Insulated Enameled Aluminum Wire Voice Coil
Material	High-purity aluminum wire aluminum coil
Size	0.2mm-9.2mm
Color	natural color,or according to enamel PEW, PIW, EIW, AIW, EI/AIW
Temperature Class	130,155,180,200,220
Grade	IEC 60317-0-2 ,IEC 60317-29 , MW36-A
Heat Resistance	200C insulation film no cracking
Application	motor,transformer,generator,welding machine,etc.

Enamelled Aluminium magnet wire is sometimes used for large transformers and motors, but because of its lower electrical conductivity, an aluminium enameled wire must have 1.6 times the cross sectional area as a copper wire to achieve comparable DC resistance.

Smaller diameter magnet wire usually has a round cross section. Thicker Aluminum Magnet Wire is often square or rectangular (with rounded corners) to permit more efficient use of available winding space.

Modern Enamelled Aluminium Magnet Wire or Enameled Copper Magnet Wire typically uses one to three layers of polymer film insulation, often of two different compositions, to provide a tough, continuous insulating layer.

Specifications of enameled aluminum wire

(1) High resistance to heat shock;

(2) High temperature;

(3) Good performace at softening breakdown;

(4) Suitable for high-speed automated routing;

(5) Able to be direct weld, with no pinhole;

(6) Resistive to high frequency, wearing, refrigerants and electronics corona;

(7) High breakdown voltage, small dielectric loss angle;

(8) Few customers are now on the market can produce side line! Throughout China on 1-2, we are one of them;

(9) We can produce the standars of a(b): 0.2mm-8.0mm;